HP Management CLI

Aus Laub-Home.de Wiki
Zur Navigation springen Zur Suche springen

ProLiant Support Pack documentation: http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02532067/c02532067.pdf

Server Info

SHOW SERVER

hpasmcli> SHOW SERVER
System        : ProLiant DL360 G3
Serial No.    : ..................
ROM version   : P31 03/01/2003
iLo present   : Yes
Embedded NICs : 1
        NIC1 MAC: 00:0b:cd:83:03:72

Processor: 0
        Name         : Intel Xeon
        Stepping     : 7
        Speed        : 2800 MHz
        Bus          : 533 MHz
        Socket       : 1
        Level2 Cache : 512 KBytes
        Status       : Ok

Processor: 1
        Name         : Intel Xeon
        Stepping     : 7
        Speed        : 2800 MHz
        Bus          : 533 MHz
        Socket       : 2
        Level2 Cache : 512 KBytes
        Status       : Ok

Processor total  : 2

Memory installed : 4096 MBytes
ECC supported    : Yes

Temeprature Info

SHOW TEMP

hpasmcli> SHOW TEMP
Sensor   Location              Temp       Threshold
------   --------              ----       ---------
#1        PROCESSOR_ZONE       33C/91F    49C/120F
#2        CPU#1                35C/95F    57C/134F
#3        I/O_ZONE             38C/100F   53C/127F
#4        CPU#2                36C/96F    58C/136F


Fan Info

SHOW FAN

hpasmcli> SHOW FAN
Fan  Location        Present Speed  of max  Redundant  Partner  Hot-pluggable
---  --------        ------- -----  ------  ---------  -------  -------------
#1   PROCESSOR_ZONE  Yes     NORMAL  12%     No         N/A      No
#2   SYSTEM          Yes     NORMAL  12%     No         N/A      No


Device boot order

SHOW BOOT

hpasmcli> SHOW BOOT
First boot device is: CDROM.
One time boot device is: Not set.


RAM/ DIMM Info

SHOW DIMM

hpasmcli> SHOW DIMM
DIMM Configuration
------------------
Cartridge #:                  0
Module #:                     1
Present:                      Yes
Form Factor:                  9h
Memory Type:                  12h
Size:                         1024 MB
Speed:                        266 MHz
Supports Lock Step:           No
Configured for Lock Step:     No
Status:                       Ok

Cartridge #:                  0
Module #:                     2
Present:                      Yes
Form Factor:                  9h
Memory Type:                  12h
Size:                         1024 MB
Speed:                        266 MHz
Supports Lock Step:           No
Configured for Lock Step:     No
Status:                       Ok

Cartridge #:                  0
Module #:                     3
Present:                      Yes
Form Factor:                  9h
Memory Type:                  12h
Size:                         1024 MB
Speed:                        266 MHz
Supports Lock Step:           No
Configured for Lock Step:     No
Status:                       Ok

Cartridge #:                  0
Module #:                     4
Present:                      Yes
Form Factor:                  9h
Memory Type:                  12h
Size:                         1024 MB
Speed:                        266 MHz
Supports Lock Step:           No
Configured for Lock Step:     No
Status:                       Ok


Power Supply Info

SHOW POWERSUPPLY

hpasmcli> SHOW POWERSUPPLY
Power supply #1
        Present  : Yes
        Redundant: Yes
        Condition: Ok
        Hotplug  : Supported
Power supply #2
        Present  : Yes
        Redundant: Yes
        Condition: Ok
        Hotplug  : Supported